Knowledge of erw line pipe

  Knowledge of erw line pipe


With the rapid development of economy and the continuous improvement of the energy demand, the pipeline as the oil and gas resources has developed in recent years. A number of medium-caliber ERW line pipe unit was completed and put into operation.ERW line pipe has been widely used in the oil and gas field gathering pipelines, oil and gas Spur. This article will focus on the circumferential residual stress on the impact of ERW line pipe manufacturing process and final product quality and control aspects of the problem.

ERW pipe forming process can be divided into two phases: the first stage of deformation; the second stage for reducing distortion. In both phases, the steel pipe inner layer is always affected by the circumferential compressive stress and compressive deformation. The outer layer of fine molding of the bending process by weeks to the tensile stress and extension deformation: in the fine shaping and sizing process. Steel outer layer of compressive stress and compressive deformation. And ERW pipes of different specifications, the outer layer of the final strain differences. This shows that the ERW pipe inner and outer layers in the pipe circumferential strain is inconsistent. Stress state and stress the size of change.

Common problems in manufacturing process of ERW line pipe:

(1) ERW line pipe manufacturing process will bend uneven deformation of the pipe week up there is a large residual stress, so take the necessary measures to reduce the negative impact of residual stress on the ERW line pipe manufacturing process.

(2) the study and control of ERW line pipe residual stress should not be confined to the detection and analysis of the residual stress of the final product, required to pipe forming process of ERW pipeline analysis, taken from the perspective of process control measures to reduce ERW pipeline the residual stress of the pipe, reduce the adverse effects of residual stress may cause the quality of ERW line pipe.

(3) Sizing is mainly to ensure the pipe diameter to meet the requirements, the hydrostatic test is to ensure that the density of steel pipe, but for the ERW pipeline in terms of pipe, Is also an important process to reduce the circumferential residual stress.

Ultimo proyecto Productos Contactos

Malaysia Water Pipeline

Saudi Water Transportation

Columbia Gas & Petroleum

Brazil Gas Transmission

Brunei Drink Water Pipeline

Nigeria Dredging Project

Saudi Arabia Fire Fighting

Tubo de acero SSAW

Tubo de acero LSAW

Tubo de acero ERW

Tubo de acero sin costura

Tubo y cierres de andamios

Tubo de acero anticorrosión

Jefe Oficina: Polígono Industrial de Daqiuzhuang, Aldea de Jinghai, Tianjin, China

PC: 301606

Teléfono: 86-731-89702576


Fax: 86-731-89702576

buzón: sales@xysteelpipe.com

Skype: xysteelpipe

Copyright © 2015 El Grupo de Xinyue Acero de Tianjin All rights reserved.